GMT(Glass Mat reinforced Thermoplastics), or glass fiber mat reinforced thermoplastic composite material, which is made of fiber as reinforcing material and thermoplastic resin as base material made by method of heating and pressurizing. It becomes widely used composite material in the world and is considered as one of the most prospective development new materials in the 21st century.
1.Lightweight
Taking one pallet size 850*680 for example, with the same thickness, our GMT pallet is lighter; for same weight, our GMT pallet is thinner. GMT pallet is lightest with high strength.
2. High Impact Resistant
Impact strength of PVC plate is less than or equal to 15KJ/m2, GMT pallet is greater than or equal to 30KJ/m2, comparing the impact strength under the same conditions.
3.Good Rigidity
GMT brick plateelastic modulus 2.0-4.0GPa, PVC sheets elastic modulus 2.0-2.9GPa. The following diagram: GMT brick plate bending effect compared with the PVC plate under the same stress conditions
4. Not Easily Deformed
5. Waterproof
Water absorption rate <1%
6. Wear-resisting
Surface hardness shore: 76D. 100 minutes vibration with materials and pressure. Brick machine screws off, pallet is not destructed, surface wear is about 0.5mm.7.Anti-high And Low Temperature
Being used at min 20 degrees, GMT pallet won’t deform or crack.
GMT pallet is able to withstand high temperature of 60-90℃, won’t easily deform, and suitable for steam curing, but PVC plate is easy to deform at high temperature of 60 degree
8. Long Service Life
Theoretically, it can be used more than 8 years
